保證消費者的切身利益，完善的售後服務讓您放心購買的NSE7_EFW-6.2題庫

KaoGuTi實行“一次不過全額退款”承諾。如果您購買我們的 NSE7_EFW-6.2 題庫，首次考試沒有通過，憑借您的 Fortinet NSE 7 - Enterprise Firewall 6.2 考試成績單，我們將退還您購買考題的全部費用，絕對保證您的利益不受到任何的損失。售後服務第一，客戶至上是kugaoti 認證考試題庫網的一貫宗旨。我們完全保障客戶隱私，尊重用戶個人隱私是本公司的基本政策，我們不會在未經合法用戶授權公開、編輯或透露其註冊資料及保存在本網站中的非公開信息。

如果你購買了我們的 Fortinet NSE 7 - Enterprise Firewall 6.2 考題，那麼你就獲得了一年免費更新的服務。當 Fortinet NSE 7 - Enterprise Firewall 6.2 考題被更新時，我們會馬上將最新版的資料發送到你的郵箱。你也可以隨時要求我們為你提供最新版的 Fortinet NSE 7 - Enterprise Firewall 6.2 考題。如果你想瞭解最新的 Fortinet NSE 7 - Enterprise Firewall 6.2 考試試題，即使你已經成功通過考試，我們也會為你免費更新 Fortinet NSE 7 - Enterprise Firewall 6.2 考試考題。

Fortinet NSE 7 - Enterprise Firewall 6.2考題由資深的IT專家團隊研究出來的結果

最近，參加 Fortinet NSE 7 - Enterprise Firewall 6.2 考試認證的人比較多，KaoGuTi為了幫助大家通過認證，正在盡最大努力為廣大考生提供具備較高的速度和效率的服務，以節省你的寶貴時間，NSE7_EFW-6.2 考試題庫就是這樣的考試指南，它是由我們專業IT認證講師及產品專家精心打造，包括考題及答案。KaoGuTi是唯一在互聯網為你提供的高品質的 Fortinet NSE 7 - Enterprise Firewall 6.2 考題的網站，題庫的覆蓋率在96%以上，在考試認證廠商對考題做出變化而及時更新題庫。所以，在我們的幫助下，您將能一次通過考試！

KaoGuTi一直致力於為廣大參加IT認證考試的考生們提供最優秀並且最值得信賴的參考資料。關於IT認證考試的出題，我們公司有著豐富的經驗。而且，KaoGuTi已經幫助過無數的考生，並得到了大家的信賴和表揚。所以，想通過 Fortinet NSE 7 - Enterprise Firewall 6.2 考試，就選擇我們的 NSE7_EFW-6.2 考題，我們值得您信賴，期待您的加入。

最真實的 NSE7_EFW-6.2 認證考試練習題和答案，確保您100%通過考試

我們的 Fortinet NSE 7 - Enterprise Firewall 6.2 考題是最新最全面的考試資料，這是由大多數考生通過實踐證明的。當您使用我們考題之后，你會發現，不需要大量的時間和金錢，僅需30個小時左右的特殊培訓，您就能輕松通過 NSE7_EFW-6.2 認證考試。我們為您提供與真實的考試題目有緊密相似性的考試練習題。

雖然有很多類似網站，也許他們可以為你提供學習指南以及線上服務，但我們KaoGuTi是領先這些眾多網站的。能使KaoGuTi在這麼多同行中脫穎而出的原因是我們有相當準確確命中考題的考試練習題和答案以及可以對考試練習題和答案迅速的更新。這樣可以很好的提高 Fortinet NSE 7 - Enterprise Firewall 6.2 認證考試的通過率，讓準備參加 Fortinet NSE 7 - Enterprise Firewall 6.2 考試的人更安心地選擇使用我們公司為你提供的考試練習題和答案通過考試。我們100%保證你通過 Fortinet NSE 7 - Enterprise Firewall 6.2 考試。

最新的 NSE 7 Network Security Architect NSE7_EFW-6.2 免費考試真題:

1. Examine the following partial outputs from two routing debug commands; then answer the question below.
# get router info kernel
tab=254 vf=0 scope=0type=1 proto=11 prio=0 0.0.0.0/0.0.0.0/0->0.0.0.0/0 pref=0.0.0.0 gwy=10.200.1.254 dev=2(port1) tab=254 vf=0 scope=0type=1 proto=11 prio=10 0.0.0.0/0.0.0.0/0->0.0.0.0/0 pref=0.0.0.0 gwy=10.200.2.254 dev=3(port2) tab=254 vf=0 scope=253type=1 proto=2 prio=0 0.0.0.0/0.0.0.0/.->10.0.1.0/24 pref=10.0.1.254 gwy=0.0.0.0 dev=4(port3)
# get router info routing-table all s*0.0.0.0/0 [10/0] via 10.200.1.254, portl [10/0] via 10.200.2.254, port2, [10/0] dO.0.1.0/24 is directly connected, port3 dO.200.1.0/24 is directly connected, portl d0.200.2.0/24 is directly connected, port2 Which outbound interface or interfaces will be used by this FortiGate to route web traffic from internal users to the Internet?

A) port3.
B) port2.
C) Both portl and port2.
D) port!

2. View the exhibit, which contains the output of a real-time debug, and then answer the question below.

Which of the following statements is true regarding this output? (Choose two.)

A) The requested URL belongs to category ID 52.
B) The web request was allowed by FortiGate.
C) This web request was inspected using the root web filter profile.
D) FortiGate found the requested URL in its local cache.

3. Refer to the exhibit, which contains a TCL script configuration on FortiManager.

An administrator has configured the TCL script on FortiManager, but failed to apply any changes to the managed device after being executed.
Why did the TCL script fail to make any changes to the managed device?

A) Incomplete commands are ignored in TCL scripts.
B) Changes in an interface configuration can only be done by CLI script.
C) The TCL script must start with #include <>.
D) The TCL command run_cmd has not been created.

4. View the exhibit, which contains the output of a BGP debug command, and then answer the question below.

Which of the following statements about the exhibit are true? (Choose two.)

A) The local router has not established a TCP session with 100.64.3.1.
B) Since the counters were last reset; the 10.200.3.1 peer has never been down.
C) The local router's BGP state is Established with the 10.125.0.60 peer.
D) The local router has received a total of three BGP prefixes from all peers.

5. Which of the following statements are correct regarding application layer test commands? (Choose two.)

A) Some of them can be used to restart an application.
B) Some of them display statistics and configuration information about a feature or process.
C) They display real-time application debugs.
D) They are used to filter real-time debugs.

問題與答案：